Siemens, along with most other building automation companies, has been known to force their customers into upgrading to their latest technology by no longer supporting their legacy hardware and/or software. In this webinar Drew Mire, the CEO of Computrols discusses the phasing out of Insight and what it will mean for those customers to upgrade to the new Desigo interface.
Take control of your building automation system without having to start from scratch.
Our advice: Don’t throw away a perfectly good control system. Let Computrols integrate to your legacy controllers through our native Building Level Network (BLN) and Floor Level Network (FLN) interfaces to get the most out of them. Not only will you save money by leveraging your existing infrastructure, but you’ll also gain better control of your building automation system through Computrols Building Automation Software (CBAS).
It may surprise you to learn that the vast majority of Computrols customers have little to no ongoing costs associated with their BAS. This is a direct result of:
- An Intuitive Front-End Software
- Lifetime Warranty DDC Controllers
- Free 24/7 Remote Tech Support
Watch the webinar at the top of this page to find out more about how Computrols can help you.
*The trademarks and servicemarks shown are the property of other entities, and use of those marks is not authorized by, sponsored by, or associated with the owners of those marks, nor is Computrols associated or affiliated with those entities in any way.
Case Study: 4000 MacArthur Siemens Integration
Location: 4000 MacArthur Blvd. | Newport Beach, CA
Facility: 2 ten-story buildings; 375,000 sq. ft.
Project Type: Integration
Controls Contractor: Computrols
Objectives: Bring in data from current points to better control HVAC and reduce energy consumption.
Decision Drivers: 20 – 30 hot/cold calls per day from tenants; Lack of control and ability to save energy.
Installation Date: August 2016