You may not know this, but Computrols headquarters is frequently used as a testbed by its research and development team. In fact, right now there are about 40 wireless temperature and humidity sensors hanging from the ceiling of our manufacturing facility and office area. (pictured below)
Our team is thrilled to announce that Computrols was recently awarded a project that will include integrating to the existing building automation system and installing a new fireman’s override panel at Miami Tower.
Miami Tower is one of the most prestigious buildings in Miami’s central business district, standing 37 stories tall, situated on top of 10 stories of parking and ground-level retail space. Continue reading Building Automation System Project: Miami Tower
Static pressure is a key ingredient in a successful Variable Air Volume (VAV) system. It ensures that air flow will be available to enable the VAVs in a system to achieve their designed Cubic Feet per Minute (CFM) at maximum demand. Simply put, the push of the air must be greater than the resistance to the flow or no air will circulate through the ducts. Typically the setpoint for static pressure is determined through the course of the testing, adjusting, and balancing (TAB) at the end of a job. Continue reading Static Pressure Control and VAV Operation
This past March, Computrols participated in the National Facilities Management & Technology (NFMT) Conference/Exposition as both an exhibitor and a speaker. The conference included 125 comprehensive conference sessions along with an extensive trade show floor featuring over 600 vendors offering anything and everything related to facility management.
Computrols’ Bob Hand, Drew Mire, and Scott Holstein manned the trade show booth, showing off Computrols new expo kit. The kit provided attendees with a quick look into the simplicity and in-depth analytics highlighted in Computrols Building Automation Software (CBAS). The mini-system included an 8X Controller, a thermostat, a temperature/humidity sensor, variable speed fan and actuator.
The team also brought a little bit of New Orleans flair to the booth, giving out Computrols Mardi Gras beads. The beads were a big hit amongst attendees and could be found dangling from the necks of those in the Mardi Gras spirit. Continue reading Computrols Brings Building Automation Tech to NFMT
Nine participants, including Computrols’ customers and distribution partners, took part in a three-day training program outlining the basics of Computrols Building Automation Software (CBAS). The training sessions were guided by Director of Research & Development and the original creator of CBAS, Mike Donlon.
The training began Tuesday, March 14 with a high-level overview of the software. Some of the topics covered in the morning session were views (text, hardware, and graphics), point command and program screen, schedules, and control loops. In the afternoon, the group jumped into some hands-on exercises in which they did basic programming such as adding controllers and points. Technical Support Manager, George Hingle, joined the class to assist with this portion of the training. Continue reading Distributors and Customers Participate in Computrols Level I CBAS Training
You always hear about how hard work will eventually pay off, but in the case of Computrols CEO, Drew Mire, it really did.
Mire started his career at Computrols eight years ago as an Electrical Helper. His duties included running wire, bending conduit, wiring VAV boxes, among a number of other tasks given to him by senior level technicians. During this time, he was also pursuing his degree from the University of New Orleans with a full-time course load. Continue reading From Electrical Helper to CEO