| Software Compatibility | Works with all versions of CBAS: Professional, Commercial, and Utility. |
|---|---|
| Power Requirements | 40VA @ 24 Vac 50/60 Hz Class 2 transformer |
| Point Configuration | All points software configurable as analog inputs, binary inputs, analog outputs, or binary outputs. |
| Analog Output Specifcations | 0-10 Vdc voltage type |
| Binary Output Specifications | 24 Vdc @ 50 mA |
| Analog Input Specifications | 10K Ohm TYPE III thermistor 0-10 Vdc 4-20 mA 0-32K Ohm resistive (scalable) |
| Binary Input Specifications | Dry contact – switch closure Pulse dry contact 5Hz max repitition rate, 100 msec (min) pulse width |
| Voltage Protection | 250 Vac on each point terminal |
| Electrical Connections | Barrier terminal block 18 -24 AWG 24 Vdc loop source terminals (1.28 Amps maximum) |
| Internet Capability | IP addressable on-board web server |
| Communication Ports | 10 Mbps RJ-45 Ethernet TCP/IP, 100 meter maximum distance One RS485 CBAS communication 9600 Baud One RS485 interface port 9600 Baud Local hand held terminal |
| Microprocessor | Intel 386 25 MHz, 3 MB Flash, 1MB SRAM 2K NVRAM Real time clock with 10 year data retention |
| Dimensions | 6.5” W x 10.375” L x 1.25” H |
| Mounting | Mount in NEMA rated enclosure |
| Shipping Weight | 5 lbs. |
| Environmental | 32 – 158 Deg. F, 10 – 90 %RH non-condensing |
| Agency Compliance | E195258 UL 916 (PAZX) Energy Management Equipment Canadian Standard C22.2 No. 205-M1983 E231285 UL 61010C-1 (QUYZ) Electrical Process Control Equipment Canadian Standard C22.2 No. 1010 CE IEC 61010-1 (1990) with Amendments 1 (1992) and 2 (1995) |
16X DDC Controller
Click image to zoom-in.
Tech Specs
Parts & Accessories
| Part Number | Description |
|---|---|
| 16X | 16 binary or analog points. Controller only – enclosure and transformer required. |
| 16X-NEMA1 | 16X controller mounted in NEMA 1 indoor enclosure with transformer. |
| 16X-NEMA4X | 16X controller mounted in NEMA 4X outdoor enclosure with transformer. |
| HHT | Hand Held Terminal |
| ST-D3-XH | 10K type duct temperature sensor |
| ST-S3E | 10K type space temperature sensor |
| ST-S3E-XA | 10K type space temperature sensor with setpoint adjustment. |
| MN-S3-700 | LCD room temperature sensor (200 feet maximum distance from controller). Note: requires stat interface board STAT-IFC. |
| MN-S3HT | Space temperature and humidity sensor. Note: requires stat interface board STAT-IFC. |
| STAT-IFC | Stat interface board |
| T-PB202-0 | 4.0 amp power supply with 120 Vac outlet. |
| VMD2B-F24D | VMD series 24Vdc relay switch with override switch. |
| DCM24-44, DM24-53, DM24-280 | Direct coupled actuators. Part numbers indicate torque ratings. |
| VP1 | VTP voltage pressure transducer ( 3-15 PSI ) |
| PV3 | Differential pressure transmitter (Specify 0-1”, 0-2” or 0-5” W.C.) |
| H-922 | Analog current sensor |
| H8035/8036 | Series 3 phase networked (MODBUS RTU) KW/KWH power meter |
Datasheets
- 16X-Controller.pdf
- Our 16X provides a nice fit for air handler and similar applications that require up to 16 points.
- 8X-Controller.pdf
- For applications requiring only 8 points or less, our 8X controller is the right choice.
- 32X-Controller.pdf
- The 32X provides the best solution for large air handlers and other equipment requiring up to 32 points.
- 64X-Controller.pdf
- For the largest equipment and central plant automation, the 64X meets the challenge.
- Online-Resources.pdf
- Computrols.com is THE building automation industry's online resource. This document highlights some of the many uses that justify bookmarking Computrols.com. Features links to the website too!
- CBAS-Datasheet.pdf
- CBAS, the simplest building automation system software to install, program, maintain, and operate. CBAS software is capable of seamlessly integrating with various manufacturers' field controllers.
