How do I set the address on a DDC1/C1?
CBAS Version 2.1.x has ability set address on th DDC1 and C1.
In Real Mode, go to the controller program screen. Click “Set Address” and popup will say to “Put the Service Jumper ON.” Put the jumper in the On position then set the Address and close the Program screen. If you changed the address, close the channel window and re-open. THe controller will be on the new address. CHange the jumper back to regular mode and the controller will download. If the databse is changing, you will need to Click on the controller and Erase Database.
- Was this article helpful?
- Yes 1 people found this article helpful.
- No 0 people did not find this article helpful.
- Give us feedback
